Different pruning shears for different purposes
Different pruning shears for different purposes
A good pair of pruning shears is indispensable for any gardener. Whether you are cutting roses, shaping shrubs or pruning fruit trees, there is a pair of shears perfectly suited to the task. Choosing the right model is not only about price, but also about ergonomics, cutting technique and materials. In this article, you will get an overview of the most important factors to consider, as well as an insight into the different types and brands on the market.
The article presents a wide range of pruning shears – from simple hand models to more advanced and ergonomic solutions. The aim is to provide an overview of features, characteristics and price ranges, so you can more easily assess which type best suits your needs. The information about the products is based on publicly available descriptions from manufacturers and retailers and is summarised to provide a clear and informative overview.
Factors to consider when buying pruning shears
When choosing pruning shears, it is important to take into account both functionality, comfort and the type of work you will use them for. Here are some of the most important considerations.
1. Cutting type: bypass or anvil
Bypass shears work like ordinary scissors, where two blades slide past each other. They provide a clean cut and are ideal for fresh branches and flowers. Anvil shears have one blade that presses against a flat surface, making them better suited for dry or hard branches, though they may leave a slightly rougher cut.
2. Grip and ergonomics
A good grip is essential, especially if you do a lot of pruning. Ergonomic handles, rubber coatings and spring mechanisms can reduce strain on wrists and fingers. Some models come in different sizes to fit both small and large hands.
3. Cutting capacity and materials
The cutting capacity indicates how thick branches the shears can handle – typically between 15 and 25 mm. Blades made of hardened steel or with a non-stick coating provide a clean cut and are easy to clean. Stainless materials extend the lifespan, especially if the shears are used in damp conditions.
4. Maintenance and replaceable parts
Pruning shears last longer if properly maintained. Clean the blade after use and lubricate moving parts regularly. Some models offer replaceable blades and springs, making it easier to extend the lifespan of the shears.
5. Price and area of use
The price varies depending on quality and features. A cheap pair may be sufficient for light pruning, while a more expensive model often provides better comfort, precision and durability. Consider how often and for what purpose you will use the shears before deciding.
Products in focus
The Fiskars Pruning Shears with Bypass M (P921) are designed to provide an efficient and comfortable cutting experience when pruning fresh branches and plants. It uses PowerGear2 technology, which triples the power transmission and reduces the required hand force, especially for thicker branches.
The blades are made of hardened steel and have a rust-resistant, low-friction coating that ensures clean cuts and reduces resistance during use. The bypass blade makes it suitable for precision cutting of live plant material.
The handle is made of lightweight FiberComp2 material with SoftGrip2 details, which follow the natural shape of the hand and provide a secure and comfortable grip. A practical sliding lock protects the blades during transport and storage.
The shears are made without PVC and come with a 25-year warranty, underscoring the product's durability and quality.
- PowerGear2 mechanism: Increases cutting power and reduces strain on the hand.
- Precision-ground hardened steel blades: Retain sharpness over time and provide clean cuts.
- Low-friction coating: Reduces resistance and protects against rust.
- Ergonomic FiberComp2 handle: Lightweight and comfortable grip with SoftGrip2 details.
- Cutting capacity: Up to 24 mm in diameter.
- PVC-free construction: Made without PVC materials.
Pros and cons
- Efficient power transmission with PowerGear2 technology
- Ergonomic and lightweight handle with good grip
- Durable hardened steel blades with rust protection
- Suitable for precision cutting of fresh branches
- Long 25-year warranty
- Not intended for dry or very hard branches
- The medium size may be too small for very large hands
Pros and cons
Pros
- Efficient power transmission with PowerGear2 technology
- Ergonomic and lightweight handle with good grip
- Durable hardened steel blades with rust protection
- Suitable for precision cutting of fresh branches
- Long 25-year warranty
Cons
- Not intended for dry or very hard branches
- The medium size may be too small for very large hands
Pros
- Efficient power transmission with PowerGear2 technology
- Ergonomic and lightweight handle with good grip
- Durable hardened steel blades with rust protection
- Suitable for precision cutting of fresh branches
- Long 25-year warranty
Cons
- Not intended for dry or very hard branches
- The medium size may be too small for very large hands
Specifications
- Manufacturer: Fiskars
- Model: 1057173 (P921)
- Product type: Pruner with bypass
- Size: M
- Cutting capacity: 24 mm
- Blade material: Hardened steel with low-friction coating
- Handle material: FiberComp2 with SoftGrip2
- Features: PowerGear2 mechanism, ergonomic design, rust-resistant, PVC-free
- Compliance standards: PVC-free
- Warranty: 25 years
- Width: 9.5 cm
- Depth: 4.4 cm
- Height: 28.5 cm
- Weight: 245 g
- EAN: 6411501111210
- Item number: 2957410
The Gardena EcoLine Secateur is a pair of pruning shears designed for precise and efficient cutting of flowers and small branches. It has a cutting capacity of up to 18 mm in diameter and uses bypass cutting technology, which provides clean cuts and protects the plants.
The shears are made with a focus on sustainability. The handle consists of plastic produced with over 80% recycled household waste, while more than 75% of the steel components used are made from recycled material. This provides a robust and durable tool with a timeless look.
The precision-ground stainless steel blades ensure sharp and reliable cutting performance. The ergonomic handle makes the shears comfortable to use, even during extended periods of garden work.
The EcoLine Secateur is equipped with practical features such as a sap groove and wire cutting function, and it can be locked with one hand for safe storage.
- Sustainable design: Made primarily from recycled materials.
- Precision blades: Stainless steel with bypass cutting technology for clean cuts.
- Ergonomic handle: Provides comfortable use during extended pruning.
- Practical features: Includes sap groove, wire cutting function, and one-hand lock.
- Cutting capacity: Up to 18 mm in diameter.
Pros and cons
- Environmentally friendly choice with a high proportion of recycled materials
- Cuts precisely and cleanly thanks to the bypass principle
- Ergonomic and easy to handle
- Durable materials in stainless steel
- Not suitable for thicker branches over 18 mm
- May require regular cleaning to maintain cutting performance
Pros and cons
Pros
- Environmentally friendly choice with a high proportion of recycled materials
- Cuts precisely and cleanly thanks to the bypass principle
- Ergonomic and easy to handle
- Durable materials in stainless steel
Cons
- Not suitable for thicker branches over 18 mm
- May require regular cleaning to maintain cutting performance
Pros
- Environmentally friendly choice with a high proportion of recycled materials
- Cuts precisely and cleanly thanks to the bypass principle
- Ergonomic and easy to handle
- Durable materials in stainless steel
Cons
- Not suitable for thicker branches over 18 mm
- May require regular cleaning to maintain cutting performance
Specifications
- Manufacturer: Gardena
- Model: 12210-20
- Item number: 3053161
- EAN: 4078500057523
- Product type: Pruning shears (Secateurs)
- Cutting capacity: 18 mm (diameter)
- Blade material: Stainless steel
- Features: Bypass blade, ergonomic handle, one-hand safety lock, sap groove, wire cutting function
- Warranty: 25 years
The Bosch EasyPrune Cordless Garden Shears are compact, electric pruning shears designed to make gardening easier. They are equipped with Power Assist technology, which automatically adds extra power when resistance is detected, making it possible to cut branches up to 25 mm thick with minimal effort.
The shears are powered by a 3.6 V battery that provides up to 450 cuts per charge. The cordless design allows freedom of movement in the garden, and charging is done via the included micro-USB cable.
EasyPrune uses a bypass cutting system with two stainless steel blades that glide past each other to provide clean cuts that promote healthy plant growth. The built-in battery level indicator makes it easy to monitor the charging status.
Weighing only 490 grams and featuring an ergonomic design, the shears are suitable for extended use without unnecessary strain on the hand.
- Power Assist technology: Automatically adds extra power when resistance is detected for easier pruning.
- Bypass cutting system: Two stainless steel blades ensure clean cuts and healthy plant growth.
- Long battery life: Up to 450 cuts per charge with a 3.6 V battery.
- Cordless freedom: Provides flexibility to work anywhere in the garden.
- Lightweight and ergonomic: Only 490 g for comfortable handling.
Pros and cons
- Automatic power assistance reduces the need for hand strength
- Long battery life per charge
- Clean cuts with stainless steel bypass blades
- Lightweight and ergonomic design
- Easy charging via micro-USB
- Not suitable for very thick or hard branches over 25 mm
- The battery is built-in and cannot be replaced
Pros and cons
Pros
- Automatic power assistance reduces the need for hand strength
- Long battery life per charge
- Clean cuts with stainless steel bypass blades
- Lightweight and ergonomic design
- Easy charging via micro-USB
Cons
- Not suitable for very thick or hard branches over 25 mm
- The battery is built-in and cannot be replaced
Pros
- Automatic power assistance reduces the need for hand strength
- Long battery life per charge
- Clean cuts with stainless steel bypass blades
- Lightweight and ergonomic design
- Easy charging via micro-USB
Cons
- Not suitable for very thick or hard branches over 25 mm
- The battery is built-in and cannot be replaced
Specifications
- Manufacturer: Bosch
- Model: 06008B2102
- EAN: 4059952647401
- Product type: Electric, cordless pruning shears (secateur)
- Battery: 3.6 V lithium-ion
- Maximum cutting capacity: 25 mm
- Features: Power Assist, bypass blade, battery level indicator, stainless steel blade, up to 450 cuts per charge
- Included accessories: Micro-USB cable
- Compliance standards: EN 60745
- Sound pressure: 70 dB(A)
- Vibration emission: 2.5 m/s² (uncertainty K: 1.5 m/s²)
- Dimensions (W × D × H): 3.1 × 25 × 8.5 cm
- Weight: 490 g
The FELCO 13 Classic Secateurs are pruning shears developed for demanding pruning tasks where extra power and control are needed. They can be used with one or two hands, allowing the user to take advantage of the extended left handle arm to increase cutting power.
The shears are made of forged aluminium and rubber, providing a combination of low weight and high durability. The red handles ensure a good grip and make the tool easy to find in the garden.
The blade is made of hardened steel and can cut branches up to 30 mm in diameter. The micrometric adjustment mechanism allows precise adjustment of the cutting head, ensuring the shears maintain their efficiency over time.
Ergonomics are considered in every detail – from the shock-absorbing handles and anti-slip coating to the double-notched thumb rest that provides a stable and comfortable grip during work.
- Flexible use: Can be used with one or two hands for increased cutting power.
- Durable materials: Forged aluminium and hardened steel ensure long life.
- Ergonomic design: Shock-absorbing and non-slip handles protect wrists and provide comfort.
- Precise adjustment: Micrometric mechanism makes it easy to fine-tune the cutting head.
- Large cutting capacity: Handles branches up to 30 mm in diameter.
Pros and cons
- Can be used with both one and two hands for extra power
- Ergonomic and shock-absorbing handles
- Precise adjustment of the cutting head
- Robust construction in forged aluminium and hardened steel
- Lifetime warranty from the manufacturer
- May feel large for users with small hands
- The solid construction makes it slightly heavier than smaller models
Pros and cons
Pros
- Can be used with both one and two hands for extra power
- Ergonomic and shock-absorbing handles
- Precise adjustment of the cutting head
- Robust construction in forged aluminium and hardened steel
- Lifetime warranty from the manufacturer
Cons
- May feel large for users with small hands
- The solid construction makes it slightly heavier than smaller models
Pros
- Can be used with both one and two hands for extra power
- Ergonomic and shock-absorbing handles
- Precise adjustment of the cutting head
- Robust construction in forged aluminium and hardened steel
- Lifetime warranty from the manufacturer
Cons
- May feel large for users with small hands
- The solid construction makes it slightly heavier than smaller models
Specifications
- Manufacturer: FELCO
- Model: F13
- Item number: 3087519
- EAN: 0783929100173
- Product type: Pruner – large hand
- Length: 27 cm
- Weight: 310 g
- Cutting capacity: 30 mm (diameter)
- Blade material: Hardened steel
- Handle material: Forged aluminium/rubber
- Colour: Red handles
- Features: Shock-absorbing handles, non-stick coating, right-/left-handed, ergonomic handle, lockable, phthalate-free, anti-slip handle, sap groove, wire cutter, angled cutting head, one-handed operation, robust, extra-long left handle, double-notched thumb rest, micrometric adjustment mechanism
- Warranty: Lifetime warranty
The Gardena EasyCut 680 A is an anvil lopper developed to cut hard and dry wood with minimal effort. Its low weight and ergonomic grip make it comfortable to use, even during extended pruning sessions.
The precision-ground blades have a non-slip non-stick coating that ensures clean cuts and reduces friction during work. The anvil design means that one blade meets a fixed anvil, providing extra power when cutting tougher branches.
The shears have a maximum cutting diameter of 3.5 cm and feature a design with black and blue handles. They are suitable for general gardening tasks that require precision and control when pruning dry branches.
- Anvil lopper: Effective for pruning hard and dry wood.
- Non-stick coating: Reduces friction and ensures clean cuts.
- Lightweight: Makes work easier and more comfortable.
- Ergonomic grip: Provides good control during pruning.
- Cutting diameter: Up to 3.5 cm.
Pros and cons
- Lightweight construction that reduces fatigue during use
- Non-stick coating for smooth and precise cuts
- Suitable for hard and dry wood
- Ergonomic design with a good grip
- Not telescopic, so the reach is limited
- Less suitable for fresh or very thick wood
Pros and cons
Pros
- Lightweight construction that reduces fatigue during use
- Non-stick coating for smooth and precise cuts
- Suitable for hard and dry wood
- Ergonomic design with a good grip
Cons
- Not telescopic, so the reach is limited
- Less suitable for fresh or very thick wood
Pros
- Lightweight construction that reduces fatigue during use
- Non-stick coating for smooth and precise cuts
- Suitable for hard and dry wood
- Ergonomic design with a good grip
Cons
- Not telescopic, so the reach is limited
- Less suitable for fresh or very thick wood
Specifications
- Manufacturer: Gardena
- Model: 12004-20
- EAN: 4078500043403
- Item number: 2736841
- Construction: Anvil lopper
- Telescopic handle: No
- Maximum cutting diameter: 3.5 cm
- Handle colour: Black and blue
- Non-stick coated blade: Yes
The Gardena EnergyCut 750 B is a lopper developed for demanding pruning tasks where extra power is needed. The built-in gear transmission significantly increases cutting power, allowing even thicker branches to be cut with less effort.
The shears are equipped with precision-ground blades that have a non-stick coating, which reduces friction and ensures clean cuts. This contributes to gentle pruning that reduces the risk of damage to the plants.
The handles are made of lightweight material and have an ergonomic design with a non-slip grip, providing good control and comfort during work. Buffers made of special plastic protect wrists and elbows by absorbing shocks during cutting.
With a maximum cutting diameter of 3.8 cm and a construction based on the bypass principle, this model is suitable for fresh wood and live branches, where a clean cut is important for the plant’s healing.
- Gear transmission: Increases cutting power when pruning thicker branches.
- Non-stick coating: Provides smooth cuts and reduces friction.
- Ergonomic design: Lightweight construction and non-slip grip for better comfort.
- Bypass construction: Ideal for fresh wood and live branches.
- Shock-absorbing buffers: Protect joints and reduce strain during use.
Pros and cons
- Effective gear transmission for increased cutting power
- Lightweight and well-balanced construction
- Non-stick coating on the blade for clean cuts
- Ergonomic handles with good grip
- Suitable for fresh wood and live branches
- Not telescopic, so the reach is fixed
- May be oversized for very thin branches
Pros and cons
Pros
- Effective gear transmission for increased cutting power
- Lightweight and well-balanced construction
- Non-stick coating on the blade for clean cuts
- Ergonomic handles with good grip
- Suitable for fresh wood and live branches
Cons
- Not telescopic, so the reach is fixed
- May be oversized for very thin branches
Pros
- Effective gear transmission for increased cutting power
- Lightweight and well-balanced construction
- Non-stick coating on the blade for clean cuts
- Ergonomic handles with good grip
- Suitable for fresh wood and live branches
Cons
- Not telescopic, so the reach is fixed
- May be oversized for very thin branches
Specifications
- Manufacturer: Gardena
- Model: 12007-20
- EAN: 4078500043465
- Item number: 2736844
- Construction: Bypass (bypass lopper)
- Telescopic handle: No
- Maximum cutting diameter: 3.8 cm
- Handle colour: Black and blue
- Non-stick coated blade: Yes
The Gardena 14776-55 electric pruner is a battery-powered telescopic pruner that allows you to trim branches at height directly from the ground. With an integrated extension tube, the tool can reach up to 3.6 metres, providing a total working height of around 5 metres.
The blades are made of hardened steel and have a non-stick coating that reduces friction and prevents branches from sticking. The maximum branch thickness the pruner can handle is 2.8 cm, making it suitable for pruning fresh wood.
A rotating cutting head with a 60-degree angle provides better access to difficult branches and a good overview during work. The ergonomic handle is equipped with an LED indicator that shows the battery's charge status.
The pruner is powered by an 18 V lithium-ion battery from the POWER FOR ALL system, which can be used across compatible Gardena products. The model is supplied without battery and charger, making it ideal for users who already have equipment in the same battery series.
- Telescopic function: Adjustable length up to 3.6 metres for high-level pruning.
- Efficient cutting capacity: Handles branches up to 2.8 cm in diameter.
- Non-stick coating: Reduces friction and makes cleaning easier.
- Rotating cutting head: Provides flexibility and precision when pruning.
- Battery operation: 18 V lithium-ion battery from the POWER FOR ALL system.
Pros and cons
- Long reach with telescopic function
- Ergonomic handle with LED battery indicator
- Non-stick coating on the blades
- Compatible with the POWER FOR ALL battery system
- Easy to store thanks to the detachable shaft
- Supplied without battery and charger
- Not suitable for very thick or hard branches
Pros and cons
Pros
- Long reach with telescopic function
- Ergonomic handle with LED battery indicator
- Non-stick coating on the blades
- Compatible with the POWER FOR ALL battery system
- Easy to store thanks to the detachable shaft
Cons
- Supplied without battery and charger
- Not suitable for very thick or hard branches
Pros
- Long reach with telescopic function
- Ergonomic handle with LED battery indicator
- Non-stick coating on the blades
- Compatible with the POWER FOR ALL battery system
- Easy to store thanks to the detachable shaft
Cons
- Supplied without battery and charger
- Not suitable for very thick or hard branches
Specifications
- Manufacturer: Gardena
- Model: 14776-55
- EAN: 4078500065580
- Item number: 3292320
- Maximum branch thickness: 2.8 cm
- Product colour: Black, Silver
- Ergonomic handle: Yes
- Material (blade): Steel
- Non-stick coated blade: Yes
- Power source: Battery
- Battery voltage: 18 V
- Battery technology: Lithium-Ion (Li-Ion)
- Warranty period: 3 years
The Gardena EnergyCut 750 A is an anvil lopper designed to handle thicker branches and more demanding pruning tasks in the garden. The built-in gear transmission increases cutting power, so even hard and dry branches can be cut with less effort.
The shears have precision-ground blades with a non-stick coating that reduces friction and ensures clean cuts that are gentle on plants. The low weight and ergonomically shaped handles in black and blue provide a secure and comfortable grip during use.
With a maximum cutting diameter of 4.2 cm, the EnergyCut 750 A is suitable for pruning both shrubs and small trees. The anvil design makes it particularly effective for hard and dead wood where extra power is required.
- Gear transmission: Increases cutting power when pruning thicker branches.
- Non-stick coating: Provides smooth cuts and reduces friction.
- Low weight: Makes the shears easier to handle during extended use.
- Ergonomic handles: Ensure a good and comfortable grip.
- Maximum cutting diameter: Up to 4.2 cm.
Pros and cons
- Effective gear transmission for increased cutting power
- Non-stick coating on the blade for easier cutting
- Low weight and ergonomic design
- Suitable for hard and dead wood
- No telescopic function, which limits reach
- The anvil lopper is best suited for hard wood and less for fresh, green branches
Pros and cons
Pros
- Effective gear transmission for increased cutting power
- Non-stick coating on the blade for easier cutting
- Low weight and ergonomic design
- Suitable for hard and dead wood
Cons
- No telescopic function, which limits reach
- The anvil lopper is best suited for hard wood and less for fresh, green branches
Pros
- Effective gear transmission for increased cutting power
- Non-stick coating on the blade for easier cutting
- Low weight and ergonomic design
- Suitable for hard and dead wood
Cons
- No telescopic function, which limits reach
- The anvil lopper is best suited for hard wood and less for fresh, green branches
Specifications
- Manufacturer: Gardena
- Model: 12008-20
- EAN: 4078500043489
- Item number: 2736842
- Construction: Anvil lopper
- Telescopic handle: No
- Maximum cutting diameter: 4.2 cm
- Handle colour: Black and blue
- Blade coating: Non-stick
The Gardena CS Anvil Branch Pruner - 297-20 is part of Gardena's combisystem and is designed to cut older and harder branches in taller trees. It can be used with a Gardena combisystem telescopic handle, allowing the user to work from the ground without the need for a ladder.
The pruner has an integrated double and fivefold transmission, which provides significant power savings during pruning. The non-stick coated blade and the adjusted geometry ensure that the branch is held securely during cutting, resulting in a clean and precise cut.
An adjustable D-handle allows ergonomic work and good control. The cord, which is 4.7 metres long and tear-resistant, can be stored in the handle so that it does not tangle during use or storage. The pruner can also be hung on branches to make work even easier.
The model can be used both with and without a handle and is designed to cut branches with a diameter of up to approximately 35 mm.
- Power-saving transmission: Double and fivefold transmission reduces the force required for pruning.
- Non-stick coated blade: Provides clean cuts and easy cleaning.
- Ergonomic D-handle: Adjustable handle with cord storage for better control and comfort.
- Long reach: Can be used with a telescopic handle for pruning at height.
- Tear-resistant cord: 4.7 metre long cord that can be fastened on both sides of the handle.
Pros and cons
- Efficient power transmission via the transmission system
- Can be used from the ground with a telescopic handle
- Non-stick coating for precise cuts
- Ergonomic and adjustable handle
- Long and durable cord
- Requires manual operation and physical effort
- Not suitable for very thick branches over approx. 35 mm
- Telescopic handle must be purchased separately
Pros and cons
Pros
- Efficient power transmission via the transmission system
- Can be used from the ground with a telescopic handle
- Non-stick coating for precise cuts
- Ergonomic and adjustable handle
- Long and durable cord
Cons
- Requires manual operation and physical effort
- Not suitable for very thick branches over approx. 35 mm
- Telescopic handle must be purchased separately
Pros
- Efficient power transmission via the transmission system
- Can be used from the ground with a telescopic handle
- Non-stick coating for precise cuts
- Ergonomic and adjustable handle
- Long and durable cord
Cons
- Requires manual operation and physical effort
- Not suitable for very thick branches over approx. 35 mm
- Telescopic handle must be purchased separately
Specifications
- Manufacturer: Gardena
- Series: Combisystem
- Model: 00297-20
- Product name: CS Anvil Branch Pruner
- Item number: 2564641
- EAN: 4078500012591
- Cord length: 4.7 metres
- Maximum branch diameter: approx. 35 mm
- Blade type: Anvil with non-stick coating
- Compatibility: Gardena combisystem telescopic handle
- Power source: Manual (not battery-powered)
The Gardena SlimCut pruning shears are designed for precise and efficient pruning of shrubs and small trees. The long aluminium handle provides extra reach, making it easier to access dense vegetation without having to bend or use a ladder.
The shears are equipped with an integrated transmission that can be adjusted between two gear ratios – a powerful 1:12 for thicker branches and a faster 1:6 for thinner branches. This flexibility makes it possible to adjust the cutting power as needed.
The precision-ground blades have a non-stick coating that reduces friction and protects the plants during cutting. The combination of lightweight materials and ergonomic design makes the tool comfortable to use for extended periods.
- Long aluminium handle: Provides great reach when pruning shrubs and trees.
- Adjustable transmission: Switch between 1:12 and 1:6 gearing for optimal cutting power.
- Non-stick coating: Reduces friction and ensures clean cuts.
- Precision-ground blades: Provides precise and gentle cutting.
- Lightweight construction: Aluminium handle reduces weight and increases comfort.
Pros and cons
- Long reach thanks to the extended handle
- Ability to adjust cutting power according to branch thickness
- Non-stick coating for easier cutting and maintenance
- Lightweight and ergonomic design
- May be less suitable for very thick branches compared to larger loppers
- The long design may require some getting used to for precision work
Pros and cons
Pros
- Long reach thanks to the extended handle
- Ability to adjust cutting power according to branch thickness
- Non-stick coating for easier cutting and maintenance
- Lightweight and ergonomic design
Cons
- May be less suitable for very thick branches compared to larger loppers
- The long design may require some getting used to for precision work
Pros
- Long reach thanks to the extended handle
- Ability to adjust cutting power according to branch thickness
- Non-stick coating for easier cutting and maintenance
- Lightweight and ergonomic design
Cons
- May be less suitable for very thick branches compared to larger loppers
- The long design may require some getting used to for precision work
Specifications
- Manufacturer: Gardena
- Model: 12010-20
- Item number: 2736835
- EAN: 4078500043533
- Construction: Bypass loppers
- Telescopic handle: Yes
- Maximum cutting diameter: 2.9 cm
- Handle material: Aluminium
- Handle colour: Black
- Non-stick coated blade: Yes
The Gardena EasyCut 500 B is a classic pruning shear designed for cutting fresh wood. The low weight and ergonomically shaped handles make it possible to work comfortably and with minimal effort, even during extended use.
The shears are equipped with precision-ground blades that have a non-slip non-stick coating. This coating reduces friction during cutting and ensures a clean and precise cut that is gentle on plants.
Buffers made of special plastic protect the user's joints by absorbing shocks during cutting work. The construction is of the bypass type, which means that the blade slides past the counter blade, providing a clean cut that is ideal for fresh branches.
With a maximum cutting diameter of 3.8 cm, the EasyCut 500 B is suitable for general pruning in the garden, where precision and easy handling are key.
- Lightweight: Makes the shears easy to handle and reduces fatigue during use.
- Ergonomic grip: Ensures comfort and control when pruning.
- Non-stick coating: Provides a clean cut and reduces friction.
- Bypass construction: Ideal for pruning fresh branches.
- Shock-absorbing buffers: Protect wrists and elbows during work.
Pros and cons
- Lightweight and ergonomic design
- Precision-ground blades with non-stick coating
- Effective for pruning fresh branches
- Shock-absorbing buffers for increased comfort
- Not suitable for dry or very hard branches
- No telescopic function for extra reach
Pros and cons
Pros
- Lightweight and ergonomic design
- Precision-ground blades with non-stick coating
- Effective for pruning fresh branches
- Shock-absorbing buffers for increased comfort
Cons
- Not suitable for dry or very hard branches
- No telescopic function for extra reach
Pros
- Lightweight and ergonomic design
- Precision-ground blades with non-stick coating
- Effective for pruning fresh branches
- Shock-absorbing buffers for increased comfort
Cons
- Not suitable for dry or very hard branches
- No telescopic function for extra reach
Specifications
- Manufacturer: Gardena
- Model: 12002-20
- EAN: 4078500043342
- Item number: 2736848
- Construction: Bypass shears
- Telescopic handle: No
- Maximum cutting diameter: 3.8 cm
- Handle colour: Black and blue
- Non-stick coated blade: Yes
Product descriptions
The Fiskars Pruning Shears with Bypass M (P921) are designed to provide an efficient and comfortable cutting experience when pruning fresh branches and plants. It uses PowerGear2 technology, which triples the power transmission and reduces the required hand force, especially for thicker branches.
The blades are made of hardened steel and have a rust-resistant, low-friction coating that ensures clean cuts and reduces resistance during use. The bypass blade makes it suitable for precision cutting of live plant material.
The handle is made of lightweight FiberComp2 material with SoftGrip2 details, which follow the natural shape of the hand and provide a secure and comfortable grip. A practical sliding lock protects the blades during transport and storage.
The shears are made without PVC and come with a 25-year warranty, underscoring the product's durability and quality.
- PowerGear2 mechanism: Increases cutting power and reduces strain on the hand.
- Precision-ground hardened steel blades: Retain sharpness over time and provide clean cuts.
- Low-friction coating: Reduces resistance and protects against rust.
- Ergonomic FiberComp2 handle: Lightweight and comfortable grip with SoftGrip2 details.
- Cutting capacity: Up to 24 mm in diameter.
- PVC-free construction: Made without PVC materials.
Pros and cons
- Efficient power transmission with PowerGear2 technology
- Ergonomic and lightweight handle with good grip
- Durable hardened steel blades with rust protection
- Suitable for precision cutting of fresh branches
- Long 25-year warranty
- Not intended for dry or very hard branches
- The medium size may be too small for very large hands
Pros and cons
Pros
- Efficient power transmission with PowerGear2 technology
- Ergonomic and lightweight handle with good grip
- Durable hardened steel blades with rust protection
- Suitable for precision cutting of fresh branches
- Long 25-year warranty
Cons
- Not intended for dry or very hard branches
- The medium size may be too small for very large hands
Pros
- Efficient power transmission with PowerGear2 technology
- Ergonomic and lightweight handle with good grip
- Durable hardened steel blades with rust protection
- Suitable for precision cutting of fresh branches
- Long 25-year warranty
Cons
- Not intended for dry or very hard branches
- The medium size may be too small for very large hands
Specifications
- Manufacturer: Fiskars
- Model: 1057173 (P921)
- Product type: Pruner with bypass
- Size: M
- Cutting capacity: 24 mm
- Blade material: Hardened steel with low-friction coating
- Handle material: FiberComp2 with SoftGrip2
- Features: PowerGear2 mechanism, ergonomic design, rust-resistant, PVC-free
- Compliance standards: PVC-free
- Warranty: 25 years
- Width: 9.5 cm
- Depth: 4.4 cm
- Height: 28.5 cm
- Weight: 245 g
- EAN: 6411501111210
- Item number: 2957410
The Gardena EcoLine Secateur is a pair of pruning shears designed for precise and efficient cutting of flowers and small branches. It has a cutting capacity of up to 18 mm in diameter and uses bypass cutting technology, which provides clean cuts and protects the plants.
The shears are made with a focus on sustainability. The handle consists of plastic produced with over 80% recycled household waste, while more than 75% of the steel components used are made from recycled material. This provides a robust and durable tool with a timeless look.
The precision-ground stainless steel blades ensure sharp and reliable cutting performance. The ergonomic handle makes the shears comfortable to use, even during extended periods of garden work.
The EcoLine Secateur is equipped with practical features such as a sap groove and wire cutting function, and it can be locked with one hand for safe storage.
- Sustainable design: Made primarily from recycled materials.
- Precision blades: Stainless steel with bypass cutting technology for clean cuts.
- Ergonomic handle: Provides comfortable use during extended pruning.
- Practical features: Includes sap groove, wire cutting function, and one-hand lock.
- Cutting capacity: Up to 18 mm in diameter.
Pros and cons
- Environmentally friendly choice with a high proportion of recycled materials
- Cuts precisely and cleanly thanks to the bypass principle
- Ergonomic and easy to handle
- Durable materials in stainless steel
- Not suitable for thicker branches over 18 mm
- May require regular cleaning to maintain cutting performance
Pros and cons
Pros
- Environmentally friendly choice with a high proportion of recycled materials
- Cuts precisely and cleanly thanks to the bypass principle
- Ergonomic and easy to handle
- Durable materials in stainless steel
Cons
- Not suitable for thicker branches over 18 mm
- May require regular cleaning to maintain cutting performance
Pros
- Environmentally friendly choice with a high proportion of recycled materials
- Cuts precisely and cleanly thanks to the bypass principle
- Ergonomic and easy to handle
- Durable materials in stainless steel
Cons
- Not suitable for thicker branches over 18 mm
- May require regular cleaning to maintain cutting performance
Specifications
- Manufacturer: Gardena
- Model: 12210-20
- Item number: 3053161
- EAN: 4078500057523
- Product type: Pruning shears (Secateurs)
- Cutting capacity: 18 mm (diameter)
- Blade material: Stainless steel
- Features: Bypass blade, ergonomic handle, one-hand safety lock, sap groove, wire cutting function
- Warranty: 25 years
The Bosch EasyPrune Cordless Garden Shears are compact, electric pruning shears designed to make gardening easier. They are equipped with Power Assist technology, which automatically adds extra power when resistance is detected, making it possible to cut branches up to 25 mm thick with minimal effort.
The shears are powered by a 3.6 V battery that provides up to 450 cuts per charge. The cordless design allows freedom of movement in the garden, and charging is done via the included micro-USB cable.
EasyPrune uses a bypass cutting system with two stainless steel blades that glide past each other to provide clean cuts that promote healthy plant growth. The built-in battery level indicator makes it easy to monitor the charging status.
Weighing only 490 grams and featuring an ergonomic design, the shears are suitable for extended use without unnecessary strain on the hand.
- Power Assist technology: Automatically adds extra power when resistance is detected for easier pruning.
- Bypass cutting system: Two stainless steel blades ensure clean cuts and healthy plant growth.
- Long battery life: Up to 450 cuts per charge with a 3.6 V battery.
- Cordless freedom: Provides flexibility to work anywhere in the garden.
- Lightweight and ergonomic: Only 490 g for comfortable handling.
Pros and cons
- Automatic power assistance reduces the need for hand strength
- Long battery life per charge
- Clean cuts with stainless steel bypass blades
- Lightweight and ergonomic design
- Easy charging via micro-USB
- Not suitable for very thick or hard branches over 25 mm
- The battery is built-in and cannot be replaced
Pros and cons
Pros
- Automatic power assistance reduces the need for hand strength
- Long battery life per charge
- Clean cuts with stainless steel bypass blades
- Lightweight and ergonomic design
- Easy charging via micro-USB
Cons
- Not suitable for very thick or hard branches over 25 mm
- The battery is built-in and cannot be replaced
Pros
- Automatic power assistance reduces the need for hand strength
- Long battery life per charge
- Clean cuts with stainless steel bypass blades
- Lightweight and ergonomic design
- Easy charging via micro-USB
Cons
- Not suitable for very thick or hard branches over 25 mm
- The battery is built-in and cannot be replaced
Specifications
- Manufacturer: Bosch
- Model: 06008B2102
- EAN: 4059952647401
- Product type: Electric, cordless pruning shears (secateur)
- Battery: 3.6 V lithium-ion
- Maximum cutting capacity: 25 mm
- Features: Power Assist, bypass blade, battery level indicator, stainless steel blade, up to 450 cuts per charge
- Included accessories: Micro-USB cable
- Compliance standards: EN 60745
- Sound pressure: 70 dB(A)
- Vibration emission: 2.5 m/s² (uncertainty K: 1.5 m/s²)
- Dimensions (W × D × H): 3.1 × 25 × 8.5 cm
- Weight: 490 g
The FELCO 13 Classic Secateurs are pruning shears developed for demanding pruning tasks where extra power and control are needed. They can be used with one or two hands, allowing the user to take advantage of the extended left handle arm to increase cutting power.
The shears are made of forged aluminium and rubber, providing a combination of low weight and high durability. The red handles ensure a good grip and make the tool easy to find in the garden.
The blade is made of hardened steel and can cut branches up to 30 mm in diameter. The micrometric adjustment mechanism allows precise adjustment of the cutting head, ensuring the shears maintain their efficiency over time.
Ergonomics are considered in every detail – from the shock-absorbing handles and anti-slip coating to the double-notched thumb rest that provides a stable and comfortable grip during work.
- Flexible use: Can be used with one or two hands for increased cutting power.
- Durable materials: Forged aluminium and hardened steel ensure long life.
- Ergonomic design: Shock-absorbing and non-slip handles protect wrists and provide comfort.
- Precise adjustment: Micrometric mechanism makes it easy to fine-tune the cutting head.
- Large cutting capacity: Handles branches up to 30 mm in diameter.
Pros and cons
- Can be used with both one and two hands for extra power
- Ergonomic and shock-absorbing handles
- Precise adjustment of the cutting head
- Robust construction in forged aluminium and hardened steel
- Lifetime warranty from the manufacturer
- May feel large for users with small hands
- The solid construction makes it slightly heavier than smaller models
Pros and cons
Pros
- Can be used with both one and two hands for extra power
- Ergonomic and shock-absorbing handles
- Precise adjustment of the cutting head
- Robust construction in forged aluminium and hardened steel
- Lifetime warranty from the manufacturer
Cons
- May feel large for users with small hands
- The solid construction makes it slightly heavier than smaller models
Pros
- Can be used with both one and two hands for extra power
- Ergonomic and shock-absorbing handles
- Precise adjustment of the cutting head
- Robust construction in forged aluminium and hardened steel
- Lifetime warranty from the manufacturer
Cons
- May feel large for users with small hands
- The solid construction makes it slightly heavier than smaller models
Specifications
- Manufacturer: FELCO
- Model: F13
- Item number: 3087519
- EAN: 0783929100173
- Product type: Pruner – large hand
- Length: 27 cm
- Weight: 310 g
- Cutting capacity: 30 mm (diameter)
- Blade material: Hardened steel
- Handle material: Forged aluminium/rubber
- Colour: Red handles
- Features: Shock-absorbing handles, non-stick coating, right-/left-handed, ergonomic handle, lockable, phthalate-free, anti-slip handle, sap groove, wire cutter, angled cutting head, one-handed operation, robust, extra-long left handle, double-notched thumb rest, micrometric adjustment mechanism
- Warranty: Lifetime warranty
The Gardena EasyCut 680 A is an anvil lopper developed to cut hard and dry wood with minimal effort. Its low weight and ergonomic grip make it comfortable to use, even during extended pruning sessions.
The precision-ground blades have a non-slip non-stick coating that ensures clean cuts and reduces friction during work. The anvil design means that one blade meets a fixed anvil, providing extra power when cutting tougher branches.
The shears have a maximum cutting diameter of 3.5 cm and feature a design with black and blue handles. They are suitable for general gardening tasks that require precision and control when pruning dry branches.
- Anvil lopper: Effective for pruning hard and dry wood.
- Non-stick coating: Reduces friction and ensures clean cuts.
- Lightweight: Makes work easier and more comfortable.
- Ergonomic grip: Provides good control during pruning.
- Cutting diameter: Up to 3.5 cm.
Pros and cons
- Lightweight construction that reduces fatigue during use
- Non-stick coating for smooth and precise cuts
- Suitable for hard and dry wood
- Ergonomic design with a good grip
- Not telescopic, so the reach is limited
- Less suitable for fresh or very thick wood
Pros and cons
Pros
- Lightweight construction that reduces fatigue during use
- Non-stick coating for smooth and precise cuts
- Suitable for hard and dry wood
- Ergonomic design with a good grip
Cons
- Not telescopic, so the reach is limited
- Less suitable for fresh or very thick wood
Pros
- Lightweight construction that reduces fatigue during use
- Non-stick coating for smooth and precise cuts
- Suitable for hard and dry wood
- Ergonomic design with a good grip
Cons
- Not telescopic, so the reach is limited
- Less suitable for fresh or very thick wood
Specifications
- Manufacturer: Gardena
- Model: 12004-20
- EAN: 4078500043403
- Item number: 2736841
- Construction: Anvil lopper
- Telescopic handle: No
- Maximum cutting diameter: 3.5 cm
- Handle colour: Black and blue
- Non-stick coated blade: Yes
The Gardena EnergyCut 750 B is a lopper developed for demanding pruning tasks where extra power is needed. The built-in gear transmission significantly increases cutting power, allowing even thicker branches to be cut with less effort.
The shears are equipped with precision-ground blades that have a non-stick coating, which reduces friction and ensures clean cuts. This contributes to gentle pruning that reduces the risk of damage to the plants.
The handles are made of lightweight material and have an ergonomic design with a non-slip grip, providing good control and comfort during work. Buffers made of special plastic protect wrists and elbows by absorbing shocks during cutting.
With a maximum cutting diameter of 3.8 cm and a construction based on the bypass principle, this model is suitable for fresh wood and live branches, where a clean cut is important for the plant’s healing.
- Gear transmission: Increases cutting power when pruning thicker branches.
- Non-stick coating: Provides smooth cuts and reduces friction.
- Ergonomic design: Lightweight construction and non-slip grip for better comfort.
- Bypass construction: Ideal for fresh wood and live branches.
- Shock-absorbing buffers: Protect joints and reduce strain during use.
Pros and cons
- Effective gear transmission for increased cutting power
- Lightweight and well-balanced construction
- Non-stick coating on the blade for clean cuts
- Ergonomic handles with good grip
- Suitable for fresh wood and live branches
- Not telescopic, so the reach is fixed
- May be oversized for very thin branches
Pros and cons
Pros
- Effective gear transmission for increased cutting power
- Lightweight and well-balanced construction
- Non-stick coating on the blade for clean cuts
- Ergonomic handles with good grip
- Suitable for fresh wood and live branches
Cons
- Not telescopic, so the reach is fixed
- May be oversized for very thin branches
Pros
- Effective gear transmission for increased cutting power
- Lightweight and well-balanced construction
- Non-stick coating on the blade for clean cuts
- Ergonomic handles with good grip
- Suitable for fresh wood and live branches
Cons
- Not telescopic, so the reach is fixed
- May be oversized for very thin branches
Specifications
- Manufacturer: Gardena
- Model: 12007-20
- EAN: 4078500043465
- Item number: 2736844
- Construction: Bypass (bypass lopper)
- Telescopic handle: No
- Maximum cutting diameter: 3.8 cm
- Handle colour: Black and blue
- Non-stick coated blade: Yes
The Gardena 14776-55 electric pruner is a battery-powered telescopic pruner that allows you to trim branches at height directly from the ground. With an integrated extension tube, the tool can reach up to 3.6 metres, providing a total working height of around 5 metres.
The blades are made of hardened steel and have a non-stick coating that reduces friction and prevents branches from sticking. The maximum branch thickness the pruner can handle is 2.8 cm, making it suitable for pruning fresh wood.
A rotating cutting head with a 60-degree angle provides better access to difficult branches and a good overview during work. The ergonomic handle is equipped with an LED indicator that shows the battery's charge status.
The pruner is powered by an 18 V lithium-ion battery from the POWER FOR ALL system, which can be used across compatible Gardena products. The model is supplied without battery and charger, making it ideal for users who already have equipment in the same battery series.
- Telescopic function: Adjustable length up to 3.6 metres for high-level pruning.
- Efficient cutting capacity: Handles branches up to 2.8 cm in diameter.
- Non-stick coating: Reduces friction and makes cleaning easier.
- Rotating cutting head: Provides flexibility and precision when pruning.
- Battery operation: 18 V lithium-ion battery from the POWER FOR ALL system.
Pros and cons
- Long reach with telescopic function
- Ergonomic handle with LED battery indicator
- Non-stick coating on the blades
- Compatible with the POWER FOR ALL battery system
- Easy to store thanks to the detachable shaft
- Supplied without battery and charger
- Not suitable for very thick or hard branches
Pros and cons
Pros
- Long reach with telescopic function
- Ergonomic handle with LED battery indicator
- Non-stick coating on the blades
- Compatible with the POWER FOR ALL battery system
- Easy to store thanks to the detachable shaft
Cons
- Supplied without battery and charger
- Not suitable for very thick or hard branches
Pros
- Long reach with telescopic function
- Ergonomic handle with LED battery indicator
- Non-stick coating on the blades
- Compatible with the POWER FOR ALL battery system
- Easy to store thanks to the detachable shaft
Cons
- Supplied without battery and charger
- Not suitable for very thick or hard branches
Specifications
- Manufacturer: Gardena
- Model: 14776-55
- EAN: 4078500065580
- Item number: 3292320
- Maximum branch thickness: 2.8 cm
- Product colour: Black, Silver
- Ergonomic handle: Yes
- Material (blade): Steel
- Non-stick coated blade: Yes
- Power source: Battery
- Battery voltage: 18 V
- Battery technology: Lithium-Ion (Li-Ion)
- Warranty period: 3 years
The Gardena EnergyCut 750 A is an anvil lopper designed to handle thicker branches and more demanding pruning tasks in the garden. The built-in gear transmission increases cutting power, so even hard and dry branches can be cut with less effort.
The shears have precision-ground blades with a non-stick coating that reduces friction and ensures clean cuts that are gentle on plants. The low weight and ergonomically shaped handles in black and blue provide a secure and comfortable grip during use.
With a maximum cutting diameter of 4.2 cm, the EnergyCut 750 A is suitable for pruning both shrubs and small trees. The anvil design makes it particularly effective for hard and dead wood where extra power is required.
- Gear transmission: Increases cutting power when pruning thicker branches.
- Non-stick coating: Provides smooth cuts and reduces friction.
- Low weight: Makes the shears easier to handle during extended use.
- Ergonomic handles: Ensure a good and comfortable grip.
- Maximum cutting diameter: Up to 4.2 cm.
Pros and cons
- Effective gear transmission for increased cutting power
- Non-stick coating on the blade for easier cutting
- Low weight and ergonomic design
- Suitable for hard and dead wood
- No telescopic function, which limits reach
- The anvil lopper is best suited for hard wood and less for fresh, green branches
Pros and cons
Pros
- Effective gear transmission for increased cutting power
- Non-stick coating on the blade for easier cutting
- Low weight and ergonomic design
- Suitable for hard and dead wood
Cons
- No telescopic function, which limits reach
- The anvil lopper is best suited for hard wood and less for fresh, green branches
Pros
- Effective gear transmission for increased cutting power
- Non-stick coating on the blade for easier cutting
- Low weight and ergonomic design
- Suitable for hard and dead wood
Cons
- No telescopic function, which limits reach
- The anvil lopper is best suited for hard wood and less for fresh, green branches
Specifications
- Manufacturer: Gardena
- Model: 12008-20
- EAN: 4078500043489
- Item number: 2736842
- Construction: Anvil lopper
- Telescopic handle: No
- Maximum cutting diameter: 4.2 cm
- Handle colour: Black and blue
- Blade coating: Non-stick
The Gardena CS Anvil Branch Pruner - 297-20 is part of Gardena's combisystem and is designed to cut older and harder branches in taller trees. It can be used with a Gardena combisystem telescopic handle, allowing the user to work from the ground without the need for a ladder.
The pruner has an integrated double and fivefold transmission, which provides significant power savings during pruning. The non-stick coated blade and the adjusted geometry ensure that the branch is held securely during cutting, resulting in a clean and precise cut.
An adjustable D-handle allows ergonomic work and good control. The cord, which is 4.7 metres long and tear-resistant, can be stored in the handle so that it does not tangle during use or storage. The pruner can also be hung on branches to make work even easier.
The model can be used both with and without a handle and is designed to cut branches with a diameter of up to approximately 35 mm.
- Power-saving transmission: Double and fivefold transmission reduces the force required for pruning.
- Non-stick coated blade: Provides clean cuts and easy cleaning.
- Ergonomic D-handle: Adjustable handle with cord storage for better control and comfort.
- Long reach: Can be used with a telescopic handle for pruning at height.
- Tear-resistant cord: 4.7 metre long cord that can be fastened on both sides of the handle.
Pros and cons
- Efficient power transmission via the transmission system
- Can be used from the ground with a telescopic handle
- Non-stick coating for precise cuts
- Ergonomic and adjustable handle
- Long and durable cord
- Requires manual operation and physical effort
- Not suitable for very thick branches over approx. 35 mm
- Telescopic handle must be purchased separately
Pros and cons
Pros
- Efficient power transmission via the transmission system
- Can be used from the ground with a telescopic handle
- Non-stick coating for precise cuts
- Ergonomic and adjustable handle
- Long and durable cord
Cons
- Requires manual operation and physical effort
- Not suitable for very thick branches over approx. 35 mm
- Telescopic handle must be purchased separately
Pros
- Efficient power transmission via the transmission system
- Can be used from the ground with a telescopic handle
- Non-stick coating for precise cuts
- Ergonomic and adjustable handle
- Long and durable cord
Cons
- Requires manual operation and physical effort
- Not suitable for very thick branches over approx. 35 mm
- Telescopic handle must be purchased separately
Specifications
- Manufacturer: Gardena
- Series: Combisystem
- Model: 00297-20
- Product name: CS Anvil Branch Pruner
- Item number: 2564641
- EAN: 4078500012591
- Cord length: 4.7 metres
- Maximum branch diameter: approx. 35 mm
- Blade type: Anvil with non-stick coating
- Compatibility: Gardena combisystem telescopic handle
- Power source: Manual (not battery-powered)
The Gardena SlimCut pruning shears are designed for precise and efficient pruning of shrubs and small trees. The long aluminium handle provides extra reach, making it easier to access dense vegetation without having to bend or use a ladder.
The shears are equipped with an integrated transmission that can be adjusted between two gear ratios – a powerful 1:12 for thicker branches and a faster 1:6 for thinner branches. This flexibility makes it possible to adjust the cutting power as needed.
The precision-ground blades have a non-stick coating that reduces friction and protects the plants during cutting. The combination of lightweight materials and ergonomic design makes the tool comfortable to use for extended periods.
- Long aluminium handle: Provides great reach when pruning shrubs and trees.
- Adjustable transmission: Switch between 1:12 and 1:6 gearing for optimal cutting power.
- Non-stick coating: Reduces friction and ensures clean cuts.
- Precision-ground blades: Provides precise and gentle cutting.
- Lightweight construction: Aluminium handle reduces weight and increases comfort.
Pros and cons
- Long reach thanks to the extended handle
- Ability to adjust cutting power according to branch thickness
- Non-stick coating for easier cutting and maintenance
- Lightweight and ergonomic design
- May be less suitable for very thick branches compared to larger loppers
- The long design may require some getting used to for precision work
Pros and cons
Pros
- Long reach thanks to the extended handle
- Ability to adjust cutting power according to branch thickness
- Non-stick coating for easier cutting and maintenance
- Lightweight and ergonomic design
Cons
- May be less suitable for very thick branches compared to larger loppers
- The long design may require some getting used to for precision work
Pros
- Long reach thanks to the extended handle
- Ability to adjust cutting power according to branch thickness
- Non-stick coating for easier cutting and maintenance
- Lightweight and ergonomic design
Cons
- May be less suitable for very thick branches compared to larger loppers
- The long design may require some getting used to for precision work
Specifications
- Manufacturer: Gardena
- Model: 12010-20
- Item number: 2736835
- EAN: 4078500043533
- Construction: Bypass loppers
- Telescopic handle: Yes
- Maximum cutting diameter: 2.9 cm
- Handle material: Aluminium
- Handle colour: Black
- Non-stick coated blade: Yes
The Gardena EasyCut 500 B is a classic pruning shear designed for cutting fresh wood. The low weight and ergonomically shaped handles make it possible to work comfortably and with minimal effort, even during extended use.
The shears are equipped with precision-ground blades that have a non-slip non-stick coating. This coating reduces friction during cutting and ensures a clean and precise cut that is gentle on plants.
Buffers made of special plastic protect the user's joints by absorbing shocks during cutting work. The construction is of the bypass type, which means that the blade slides past the counter blade, providing a clean cut that is ideal for fresh branches.
With a maximum cutting diameter of 3.8 cm, the EasyCut 500 B is suitable for general pruning in the garden, where precision and easy handling are key.
- Lightweight: Makes the shears easy to handle and reduces fatigue during use.
- Ergonomic grip: Ensures comfort and control when pruning.
- Non-stick coating: Provides a clean cut and reduces friction.
- Bypass construction: Ideal for pruning fresh branches.
- Shock-absorbing buffers: Protect wrists and elbows during work.
Pros and cons
- Lightweight and ergonomic design
- Precision-ground blades with non-stick coating
- Effective for pruning fresh branches
- Shock-absorbing buffers for increased comfort
- Not suitable for dry or very hard branches
- No telescopic function for extra reach
Pros and cons
Pros
- Lightweight and ergonomic design
- Precision-ground blades with non-stick coating
- Effective for pruning fresh branches
- Shock-absorbing buffers for increased comfort
Cons
- Not suitable for dry or very hard branches
- No telescopic function for extra reach
Pros
- Lightweight and ergonomic design
- Precision-ground blades with non-stick coating
- Effective for pruning fresh branches
- Shock-absorbing buffers for increased comfort
Cons
- Not suitable for dry or very hard branches
- No telescopic function for extra reach
Specifications
- Manufacturer: Gardena
- Model: 12002-20
- EAN: 4078500043342
- Item number: 2736848
- Construction: Bypass shears
- Telescopic handle: No
- Maximum cutting diameter: 3.8 cm
- Handle colour: Black and blue
- Non-stick coated blade: Yes
Other products
The Gardena TeleCut 650-900 B pruning shears are designed to cut fresh wood with precision and minimal effort. The low weight and ergonomic grip make it comfortable to use, even for extended periods of work.
The telescopic lever arms can be adjusted in length, providing better reach for higher branches and increased cutting power. Buffers made of special plastic protect the user's joints during work.
The blades are precision-ground and have a non-stick coating that ensures clean cuts and reduces friction. The bypass design makes it suitable for pruning fresh branches without damaging the plant.
- Telescopic handles: Adjustable length from 650 to 900 mm for better reach.
- Lightweight construction: Makes it easy to work for longer periods without fatigue.
- Precision-ground blade: Provides clean and precise cuts in fresh wood.
- Non-stick coating: Reduces friction and protects plants during cutting.
- Ergonomic design: Buffers made of special plastic protect joints and provide comfortable use.
Pros and cons
- Lightweight and ergonomic grip
- Telescopic handles for increased reach
- Non-stick coating on the blade
- Suitable for fresh branches
- Not intended for hard or dry wood
- The product has been discontinued and may be difficult to find in stock
Pros and cons
Pros
- Lightweight and ergonomic grip
- Telescopic handles for increased reach
- Non-stick coating on the blade
- Suitable for fresh branches
Cons
- Not intended for hard or dry wood
- The product has been discontinued and may be difficult to find in stock
Pros
- Lightweight and ergonomic grip
- Telescopic handles for increased reach
- Non-stick coating on the blade
- Suitable for fresh branches
Cons
- Not intended for hard or dry wood
- The product has been discontinued and may be difficult to find in stock
Specifications
- Manufacturer: Gardena
- Model: 12009-20
- EAN: 4078500043519
- Item number: 2736837
- Construction: Bypass loppers
- Telescopic handle: Yes (650–900 mm)
- Cutting diameter (max): 3.8 cm
- Handle colour: Black and blue
- Non-stick coated blade: Yes
The Gardena TeleCut 520-670 B pruning shears are designed to cut fresh wood with precision and minimal effort. The low weight and ergonomic grip make it comfortable to use, even during extended pruning sessions.
The telescopic lever arms can be adjusted in length, providing better reach for higher branches and increased power transmission when cutting. Buffers made of special plastic protect wrists and elbows from shocks during work.
The blades are precision-ground and have a non-slip non-stick coating, ensuring clean cuts and reducing friction. The combination of bypass blades and gentle cutting technique makes it suitable for the care of living plants and shrubs.
- Telescopic handles: Adjustable length from 520 to 670 mm for better reach.
- Lightweight construction: Reduces fatigue during prolonged use.
- Precision-ground blade: Provides clean and precise cuts in fresh wood.
- Non-stick coating: Reduces friction and protects plants.
- Shock-absorbing buffers: Protect joints and provide more comfortable pruning.
Pros and cons
- Adjustable telescopic arms provide flexible reach
- Lightweight and ergonomic design
- Non-stick coating for easier cutting
- Suitable for fresh branches and living plants
- Not intended for dry or very hard branches
- The product has been discontinued and may be difficult to find in stock
Pros and cons
Pros
- Adjustable telescopic arms provide flexible reach
- Lightweight and ergonomic design
- Non-stick coating for easier cutting
- Suitable for fresh branches and living plants
Cons
- Not intended for dry or very hard branches
- The product has been discontinued and may be difficult to find in stock
Pros
- Adjustable telescopic arms provide flexible reach
- Lightweight and ergonomic design
- Non-stick coating for easier cutting
- Suitable for fresh branches and living plants
Cons
- Not intended for dry or very hard branches
- The product has been discontinued and may be difficult to find in stock
Specifications
- Manufacturer: Gardena
- Model: 12005-20
- EAN: 4078500043427
- Item number: 2736839
- Construction: Bypass loppers
- Telescopic handle: Yes (520–670 mm)
- Cutting diameter (max): 3.8 cm
- Handle colour: Black and blue
- Non-stick coated blade: Yes
The Gardena city gardening Balcony pruning shears are designed for pruning plants in smaller outdoor spaces such as balconies and terraces. The shears are suitable for cutting flowers, herbs and thin branches, making them ideal for both decorative and practical purposes in urban gardens.
The blades are made of stainless steel, providing durable and corrosion-resistant cutting performance. The handles have two adjustable positions, allowing the user to adapt the grip to the task and achieve better control during cutting.
An integrated safety lock system allows the shears to be stored safely when not in use. The combination of functionality and compact design makes them suitable for use in small garden spaces where space is limited.
- For balcony and terrace: Designed for pruning flowers, herbs and thin branches in smaller outdoor spaces.
- Stainless steel blades: Provides precise cuts and long lifespan.
- Adjustable handles: Two positions for better ergonomics and control.
- Safety lock: Makes storage and handling safer.
- Compact design: Easy to handle and ideal for urban gardens.
Pros and cons
- Lightweight and compact construction
- Stainless steel blades for durability
- Ergonomic handles with adjustable position
- Built-in safety lock
- Primarily suitable for smaller branches and plants
- The product has been discontinued and may be difficult to find on the market
Pros and cons
Pros
- Lightweight and compact construction
- Stainless steel blades for durability
- Ergonomic handles with adjustable position
- Built-in safety lock
Cons
- Primarily suitable for smaller branches and plants
- The product has been discontinued and may be difficult to find on the market
Pros
- Lightweight and compact construction
- Stainless steel blades for durability
- Ergonomic handles with adjustable position
- Built-in safety lock
Cons
- Primarily suitable for smaller branches and plants
- The product has been discontinued and may be difficult to find on the market
Specifications
- Manufacturer: Gardena
- Model: 8707-20
- Item number: 2922353
- EAN: 4078500030380
- Cutting system: Bypass
- Handle colour: Blue
- Blade material: Stainless steel
- Built-in safety lock: Yes
The Gardena EasyCut 680 B is a classic pruning shear designed for pruning fresh wood. The low weight and ergonomically shaped handles make it possible to work comfortably and with less effort.
The shears are equipped with precision-ground blades that have a non-slip non-stick coating, ensuring clean and precise cuts. The bypass design means it is particularly suitable for fresh branches, where a clean cut promotes healthy growth.
Buffers made of special plastic reduce strain on hands and joints during use, making it comfortable to work with for longer periods. The combination of functional design and durable materials makes it a practical tool in any garden.
- Lightweight: Makes pruning easier and less strenuous.
- Ergonomic grip: Ensures comfortable handling during work.
- Precision-ground blades: Provide clean and precise cuts in fresh wood.
- Non-stick coating: Reduces friction and prevents the blade from sticking.
- Bypass design: Ideal for pruning fresh branches.
Pros and cons
- Light and easy to handle
- Ergonomic design with good balance
- Non-stick coating for smooth cuts
- Suitable for fresh branches up to 3.8 cm in diameter
- Not intended for dry or hard branches
- Lack of telescopic handles limits reach
Pros and cons
Pros
- Light and easy to handle
- Ergonomic design with good balance
- Non-stick coating for smooth cuts
- Suitable for fresh branches up to 3.8 cm in diameter
Cons
- Not intended for dry or hard branches
- Lack of telescopic handles limits reach
Pros
- Light and easy to handle
- Ergonomic design with good balance
- Non-stick coating for smooth cuts
- Suitable for fresh branches up to 3.8 cm in diameter
Cons
- Not intended for dry or hard branches
- Lack of telescopic handles limits reach
Specifications
- Manufacturer: Gardena
- Model: 12003-20
- Item number: 2736847
- EAN: 4078500043366
- Design: Bypass
- Telescopic handles: No
- Maximum cutting diameter: 3.8 cm
- Handle colour: Black and blue
- Blade coating: Non-stick
The Gardena EnergyCut 600 B is a lopper developed to handle thicker branches and more demanding pruning tasks. The built-in gear transmission increases cutting power, allowing the user to work efficiently without applying unnecessary force.
The shears have a low weight and ergonomically designed handles that provide a secure and comfortable grip during use. Buffers made of special plastic reduce strain on wrists and elbows, making longer work sessions more comfortable.
The precision-ground blades are equipped with a non-slip non-stick coating that ensures clean cuts and reduces friction during cutting. The construction is of the bypass type, meaning the blade slides past the counter blade for a precise and gentle cut.
The blade can be replaced, extending the product’s lifespan and making maintenance simple.
- Gear transmission: Increases cutting power when pruning thicker branches.
- Low weight: Makes the shears easier to handle during extended use.
- Ergonomic design: Comfortable handles with a good grip.
- Non-stick coating: Reduces friction and ensures clean cuts.
- Replaceable blade: Extends the tool’s lifespan.
Pros and cons
- Efficient power transfer via gear transmission
- Lightweight and ergonomic construction
- Non-stick coating for precise cuts
- Replaceable blade for easy maintenance
- Not telescopic, so the reach is fixed
- May be oversized for very thin branches
Pros and cons
Pros
- Efficient power transfer via gear transmission
- Lightweight and ergonomic construction
- Non-stick coating for precise cuts
- Replaceable blade for easy maintenance
Cons
- Not telescopic, so the reach is fixed
- May be oversized for very thin branches
Pros
- Efficient power transfer via gear transmission
- Lightweight and ergonomic construction
- Non-stick coating for precise cuts
- Replaceable blade for easy maintenance
Cons
- Not telescopic, so the reach is fixed
- May be oversized for very thin branches
Specifications
- Manufacturer: Gardena
- Model: 12006-20
- Item number: 2736838
- EAN: 4078500043441
- Construction: Bypass lopper
- Telescopic handle: No
- Maximum cutting diameter: 3.8 cm
- Handle colour: Black and blue
- Non-stick coated blade: Yes
Different types of pruning shears
There are many types of pruning shears, each designed for specific tasks in the garden. The choice depends on which plants you work with and how much force you want to use.
1. Hand shears
The classic hand shears are ideal for smaller branches, flowers and shrubs. They are light, simple and easy to use, making them perfect for precision work and daily garden maintenance.
2. Ratchet shears (step-by-step cut)
Ratchet shears make it easier to cut thick branches by dividing the cut into several steps. The mechanism reduces the required force and is therefore suitable for users with less hand strength or for longer pruning tasks.
3. Telescopic shears
Telescopic models have extendable handles, allowing you to reach high branches without using a ladder. They are ideal for pruning trees and tall shrubs, providing extra reach and power.
4. Electric pruning shears
Electric or battery-powered pruning shears are a good choice for larger gardens or professional use. They require minimal hand strength and can cut many branches quickly and efficiently. However, they are heavier and require charging.
5. Specialised models
There are also pruning shears for special purposes, such as rose shears with narrow blades for precision cuts or bonsai shears for finer shaping. These models provide extra control where precision is more important than power.
Different brands of pruning shears
The market for pruning shears includes many well-known manufacturers, each with their own focus and strengths.
Fiskars
Fiskars is a popular choice among both hobby and professional gardeners. The brand is known for ergonomic design, sharp blades and durable materials. Many models feature patented mechanisms that increase cutting power.
Gardena
Gardena offers a wide range of pruning shears, from simple hand models to advanced telescopic and battery-powered versions. The focus is on user-friendliness, precision and modern design that suits many needs.
Felco
Felco is a Swiss brand known for high quality and precision. Their shears are often used by professional gardeners and vintners. Most models have replaceable parts and can be adjusted for optimal comfort.
Bahco
Bahco produces robust pruning shears with a focus on ergonomics and efficiency. They are suitable for demanding tasks and come in several variants to fit different hand sizes and cutting techniques.
Wolf-Garten
Wolf-Garten combines classic German quality with practical details such as non-stick coating and adjustable handles. The brand offers both manual and telescopic models suitable for many types of pruning.
Frequently asked questions
Which type of pruning shears should I choose?
It depends on what you are pruning. For fresh branches and flowers, bypass shears are best, while anvil shears are suitable for dry or hard branches. For high branches, a telescopic model can be practical.
How do I maintain my pruning shears?
Clean the blade after use, wipe it off and lubricate moving parts with a little oil. Store the shears in a dry place and sharpen the blade regularly to maintain a clean cut. Replace worn parts if possible.
How often should I replace my pruning shears?
A good pair of pruning shears can last for many years if properly maintained. If the blade becomes dull or the mechanism feels loose, it may be time to replace parts or invest in a new model.
Can I use the same shears for all types of plants?
In many cases you can, but for the best results it is beneficial to have different shears for different tasks. A small pair for flowers and a stronger model for branches provide better control and results.
Are electric pruning shears worth the money?
If you prune a lot or often work with thick branches, an electric model can save both time and effort. For ordinary gardening, however, a manual pair is often sufficient and easier to handle.
Læs også:
